技术参数Technical parameters
用于有功功率的和指示，并具有逆功率、功率继电器的越限输出功能。It is used to measure and indicate the active power,and has the over limit output function of the reverse power relay and power relay.
指示精度Accuracy: Class 1.5。
环境温度Ambient temperature range：-25℃ to +55℃。
外壳防护Housing protection：IP44。
耐振动Vibration resistance：2-100HZ≤0.7g。
耐电压Dielectric test：AC2.6KV，50HZ，1min。
设置点参数 Set point:(Pn满度值 Full scale value)
功率越限Power overload：25%～125%×Pn；时间延迟Time delay: 0～20S.
逆功率设Reverse power : -(0～25%)×Pn;时间延迟Time delay: 0.2～20S.
规格参数及测量范围 Specification parameter and Measuring range:同as F96-W
电源功耗Power:Consumption :≤3VA
输出触点容量Contact rating：AC250V ，3A；DC28V，3A.
产品分类 Kind of products
型号 Type | 展开角 angle | 外形尺寸（mm） Outline（AXBXC） | 开孔尺寸 Cut-out（mm） | 结构代码 Structure code | 外形图 Outline drawing | 接线图 Wiring drawing | 重量（Kg） Weight |
F96-WNJB-II，Q96-WTCANA | 90° | 96X96X133 | 92+0.5X92+0.5 | A | 图Figure 1 | 图Figure 3 | 0.9 |
F96-WNJ-II，Q96-WTCZANA | 240° | 96X96X133 | 92+0.5X92+0.5 | B | 图Figure 2 | 图Figure 3 | 1.1 |
使用说明Directions
使用前应检查仪表接线正确无误，输入电压、电流规格应与铭牌标识相符。Before use,the instrument wiring should be checked correctly,and the input voltage and current specifications should be consistent with the nameplate identification.
当接通电源后，绿色LED指示灯点亮，表示仪表处于工作状态。When power supply is switched on,green LED for indication “power on”is lit,which indicates devise is running correctly.
当逆功率或功率超过设置点时，黄色指示灯（-P>或P>）点亮，再经过所设置的时间延迟，红色LED灯（RELAY A或B）点亮，表示继电器已发生动作而改变状态。When the reverse power or power exceeds the set point, the yellow indicator light (-p > or P>) will be on, and after the set time delay, the red LED light (RELAY A or B) will be on, indicating that the RELAY has changed its state due to the action.
特殊用途仪表请在型号前半部的数字后加“J”（仅限于240°仪表），如F96J-WNJ-II。Specify“J”for special meter.(Only for Pointer deflection 240 degree meter)as:F96J-WNJ-II.
