技术参数Technical parameters
用于电网频率的测量和越限报警输出。Measurement of network frequency and to output alarm signal if to exceed limit.
报警点设置Alarm settings:上限Upper limit、下限lower limit、上下限upper and lower limit.
指示精度Accuracy: Class 0.5。
环境温度Ambient temperature range:-25℃ to +55℃。
外壳防护Housing protection:IP44。
耐振动Vibration resistance:2-100HZ≤0.7g。
耐电压Dielectric test:AC2.6KV,50HZ,1min。
辅助电源(需要时)Aux.supply(when needed):DC24V±20%;(AC100V,220V)±20%
电压规格及测量范围Voltage specifications and Measuring range:同as F96-HZ
电源功耗Power:Consumption :≤2VA
输出触点容量Contact rating:AC250V ,1A;DC28V,1A.
产品分类 Kind of products
型号 Type | 展开角 angle | 外形尺寸(mm) Outline(AXBXC) | 开孔尺寸 Cut-out(mm) | 结构代码 Structure code | 外形图 Outline drawing | 接线图 Wiring drawing | 重量(Kg) Weight |
F96B-HZB,Q96-HCA,51L6 | 90° | 96X96X80 | 92+0.5X92+0.5 | A | 图Figure 1 | 图Figure 3 | 0.45 |
F96B-HZ ,Q96-HZCA,51L5 | 240° | 96X96X102 | 92+0.5X92+0.5 | B | 图Figure 2 | 图Figure 3 | 0.65 |
外形图 Outline drawing
接线图Wiring diagram
使用说明Directions
一般情况下,仪表工作电源取自输入信号,无需额外辅助电源;但当用户有明确需要时,应在合同中注明和确认。In general,the power of =the instrument is taken from the input signal,and no additional auxiliary supply is needed.But when the user has a definite requirement,it should be marked and confirmed in the contract.
所有仪表均带有设定调整旋钮,一般情况下,仪表在出厂时已根据用户要求调整好,用户如有需要亦可自行进行调整。All meters could be adjusted.Usually,default setting is based is based on customer’s demand and could be adjusted by customer if requirement.
用户应在订货时说明型号、规格、电源、报警限值等参数,并在合同中注意及确认。Customer should specify type,specification Aux.power,alarm limit etc in order and confirm in contract.
特殊用途仪表请在型号前半部的数字后加“J”(仅限于240°仪表),如F96JB-HZ。Specify“J”for special meter.(Only for Pointer deflection 240 degree meter)as:F96JB-HZ.